A dental curing light lamp – is a mandatory attribute of any dental office. The Woodpecker LED D dental curing light lamp has an ergonomic design, consists of a plastic case, a built-in battery and a glass fiber optic light guide. The advantages of this model include: 1. light weight (143 g); 2. this is equipment that can be used both wirelessly and when connected with wire; 3. the intensity of the lamp is 1700 mV/cm2, which makes it possible to easily cope with the execution of basic procedures and expands the possibilities of using equipment in orthodontic practice for fixing orthodontic structures; 4. the device has several modes of operation with individual settings for each of them and the ability to adjust the duration of illumination; 5. silent operation; 6. no vibration and no thermal radiation; 7. the absence of wire makes the lamp convenient to work with. The range of tasks for which the lamp is used is very wide: whitening of tooth enamel in the conditions of a dental office; polymerization of such light-sensitive materials as: composite sealing materials; sealants; adhesives; siliers; bases, etc; detection of dental deposits and plaques. The combination of high technical-functional and ergonomic characteristics of this model contributes to the growth of its popularity among dentists. Modes: Standard mode-FULL, 5; 10; 15; 20 seconds – intensity 1000 mV/cm² ~ 1200 mV/cm² Soft start-RAMPIN, The intensity increases constantly, after five seconds it reaches the highest value PULSE pulse mode, blue light works in pulse state. The operating time of all modes is ten seconds

A dental curin light lamp – is a mandatory attribute of any dental office. The Woodpecker iLed II – dental curin light lamp is a new generation wireless equipment consisting of a plastic case, a built-in battery and a metal head with LEDs. This design increases the resistance of the equipment to mechanical damage. The advantages of this model include: 1. this lamp has several LEDs, which are protected by a convex lens, which helps to increase the illumination area; 2. the head of the photopolymer lamp is capable of rotating by 360°, which facilitates work in hard-to-reach places; 3. the point-curing lens with a magnetic fixator, which is included in the kit, provides point focusing of the light flux, which allows you to use this device for more convenient fixation of veneers and crowns with photopolymer materials; 4. the device has several modes of operation with individual settings for each of them and the ability to adjust the duration of illumination; 5. the intensity of the lamp is 2500 mV/cm2, which makes it possible to easily cope with the execution of basic procedures and expands the possibilities of using equipment in orthodontic practice for fixing orthodontic structures; 6. silent operation; 7. no vibration and no thermal radiation; 8. the absence of wire makes the lamp convenient to work with. The range of tasks for which the lamp is used is very wide: polymerization of such light-sensitive materials as: composite sealing materials; sealants; adhesives; siliers; bases, etc; whitening of tooth enamel in the conditions of a dental office; installation and securing of orthopaedic and orthodontic structures; detection of dental deposits and plaques; fixation of overlays, veneers and tabs with the help of light-sensitive materials. Modes: Turbo mode – TURBO (P1), intensity 2300 mV/cm² ~ 2500 mV/cm², illumination duration: 1; 3 seconds Standard mode – NORMAL (P2), intensity 1000 mV/cm² ~ 1200 mV/cm², illumination duration: 5; 10; 15; 20 seconds

Woodpecker Minipex Dental Apex locator is designed to be small and lightweight for easy handling, but it packs a powerful performance. It features a 100% automatic digital calibration, ensuring that the measurement accuracy remains consistent without any decrease. Despite its compact size, the Apex Locator maintains stability and reliability during clinical use. It has been tested with clinical data fitting, demonstrating a high measurement accuracy of up to 97.71%. The updated chip in the Dental Apex Locator enables real-time response and improved sensitivity, providing precise measurements during endodontic procedures. An innovative algorithm is employed to ensure intelligent anti-interference, minimizing the impact of external factors on measurement accuracy. The device is equipped with a 2.4" LCD screen that offers a clear interface, allowing users to quickly and easily view the measurement results. The display uses various colors and segment indicators to show the trace of the touch probe in the root canal, aiding in visualization. The Dental Apex Locator's screen is designed with soft colors and light distribution to avoid glare and provide a comfortable viewing experience for the dentist or endodontist. Please Note: Accuracy in readings for apex locators is claimed to be 97.7% accurate. Readings may vary from the conventional method of working length determination (radiographic method) & may fluctuate in cases where the precautions (recommended in the user manual) are not followed Advantages: color 2.4 inch LCD display 2-color indication of the file trajectory the special coating is made according to IMD technology, which provides resistance to scratches and friction an innovative algorithm, an updated processor, real-time feedback, doubled sensitivity and resistance to interference allow you to get accurate measurements (up to 97.71%) automatic calibration when the file approaches the apical hole closer than 2 mm, the sound signal is turned on components can be sterilized at high temperature and high pressure low battery consumption ensures 7-8 hours of continuous operation

Woodpecker Dental Air Polisher AP-H is an advanced air-polishing tool designed for efficient and comfortable biofilm control. Using compressed air, the polisher sprays a combination of powder and water to effectively remove biofilm, pigments, and soft debris from tooth surfaces without scratching or harming soft tissues. Unlike traditional ultrasonic scaling, this method is gentler and reduces patient discomfort. It features a 0.7mm small-caliber nozzle, allowing for concentrated powder output and more accurate scaling. The handpiece has a three-section design with a detachable feature for easy maintenance in case of clogs. The transparent powder container and ergonomic, lightweight design ensure ease of use, while the device’s compatibility with all dental chairs and its sleek black and gold design add to its appeal. Weighing just 125g, it offers flexibility and convenience for professionals. Woodpecker AP-H vs. AP-H Plus modell - What is the Difference? Please note that the AP-H-Plus is the same as the AP-H, but it also includes the AP-2 subgingival handpiece, subgingival tips (qty 10) and a wrench to change the handpieces. If you do not require subgingival air polishing you can order the AP-H model. Purpose: Using a stream of air, water and powder, AIR-FLOW removes supra-desnal dental deposits; Returns the natural, healthy color to the teeth; Allows you to get an ideal surface before restoration with composite materials or covering the tooth with a ceramic facet Advantages: A combination of black and gold colors in the design Light weight of the tip ~125 gr. The handpiece is easy to disassemble and clean Allows subgingival cleaning Application: The handpiece for Air Flow is connected to the dental unit through the M4 connector hose Minimal powder consumption without dust cloud formation during operation was noted. The possibility of using powders with a dispersion of 14-65 μm