SMART A

The Smart A Dental Brushless Endo Motor from Woodpecker is the latest in intelligent endo. The Smart App Controls allow you to effortlessly connect the Endo Motor to your preferred device (tablet, phone, watch, etc.) via Bluetooth to control, program and store data from your endodontic procedures. There are no control buttons on the Smart A Endo Motor and it is controlled solely through the app and a third-party device of your choice. The Smart A Endo Motor is compact, sleek and only 17mm in diameter to hold. The contra angle head diameter was reduced by 12.5% and the head weight was reduced by 18%. The App has customized treatment plans where you can select pre-programmed file types (including reciprocating function) or you can easily add your own file type and preferences to save for future use. The App also allows you to store patient data about the treatment in the cloud for future reference and to get patient report (e.g., files used, file usage time, treatment performed, etc.). The Smart A Dental Endo Motor and its App also allow for voice control through VIVI to control your Endo Motor by voice commands with command ""hi vivi"". This allows you to control the Endo Motor hands-free! You can adjust the speed, direction, torque, file type, etc. by your voice. The Smart A Endo Motor has two new features called the BB and LB modes which are explained as follows: BB Mode (Block Bypass) Problem: Sometimes there is dentin debris or pulp residue blocking the apex. Solution: The BB mode allows the file to move continuously at an angle of 90 degrees with 1 second interval between each movement. This rotation with up and down motion can bypass the block. LB Mode (Ledge Bypass) Problem: There are many reasons for ledge formation and ledge bypassing is needed to locate the original root canal. Solution: The LB mode allows the file to reciprocate with a gradual angle change and reciprocates with a cycle of set angle at -2, -1, 0 and +1 degrees. The Smart A Endo Motor from Woodpecker has a built-in apex locator with no need for a silicone sleeve. There is also a wireless foot pedal for easy controls. The Smart A Endo Motor is very quiet and was compared to many other brushless endo motors in terms of noise production. The Smart A was proven to be quieter than other brushless motors. Please note the app currently only works with Apple devices (iPhone or iPad). Advantages: - Ability to keep a treatment log, create an individual card of each patient and store all data in cloud storage. - If several doctors will use the motor, it is possible to create a personal office for each doctor separately. - Voice control and adjustment of engine operating parameters. - The ability to connect to a wireless foot pedal via Bluetooth and start/stop the motor using this pedal. - Constant software update. - Tip reduction 6:1. - Head rotation angle at 360°. - The head of the micromotor handpiece is covered with an insulating polymer material. - Wireless convenient charging. - Most built-in known file systems and the ability to add and save file system parameters that are not in the engine database. - 5 modes that can be set/configured by the user. - Ability to change speed, torque and rotation angles. - Built-in apex locator with visualization of the position of the file in the channel in real time. - The compact handpiece head provides a large field of view during treatment. - The front center of gravity and light weight create a comfortable balance and reduce the load on the wrist. Operating modes: BB-mode (Block Bypass): block safe passage mode (dentine shavings/fractures, pulp residues). The file rotates clockwise with a stop of 1 second after each 90° rotation. LB-mode (Ledge Bypass): Safe Ledge Pass Mode. The file rotates in reciprocating mode with a gradual change in the angle of rotation. After passing the ledge, without removing the file from the channel, pressing the button to start the motor goes into clockwise rotation mode. EAL - autonomous apex locator mode. CW – clockwise rotation (when the maximum torque value is reached, the file rotation mode will automatically switch to reverse rotation mode and return to normal mode when the load is again below the set torque value). CCW – counterclockwise rotation. REC - reciprocating motion (interval 5°, adjustment range 5° - 400°). ATR - adaptive torque reversal. The file rotates clockwise, but if the load on the file exceeds the set torque value in a certain area, the file begins to rotate in reciprocating mode. After passing this section, the file returns to the previous clockwise rotation mode. With an active apex locator, additional functions are activated: Apical Action (AP) – file when reaching the apical point stops or starts rotating in the opposite direction (reverse, stop). Auto Start – file rotation begins when the file enters the channel. Auto Stop – file rotation stops when the file is output from the channel. Apical Slow Down - the rotation of the file slows down when approaching the apical hole.